Описание
Typical applications for the SVR-N-5000VA
Where buyers actually put this frame — matched to the markets and duty cycles we ship into.
- Whole-house protectionOne 5kVA unit covers lighting, refrigeration and entertainment loads.
- Small restaurant or shopChillers, freezers and POS on a single stabilised feed.
- Clinic and laboratoryAnalysers and imaging devices that trip on low mains.
- Workshop single-phase machinesCompressors and welders up to roughly 4kW running load.
- CCTV head-endRecorder, monitor and camera PSU bank.
- UPS front-endConditions the input so the UPS transfers to battery less often.
Full specification — SVR-N-5000VA relay-type voltage stabilizer
Every rating below is what we build to at the factory. Confirm your voltage combination and country standard when you enquire.
| Модель | SVR-N-5000VA |
|---|---|
| Номинальная мощность | 5,000VA |
| Number of phases | Single phase |
| Диапазон входного напряжения | 160-250VAC (other ranges to order) |
| Выходное напряжение | 220 В ПЕРЕМЕННОГО ТОКА |
| Regulation accuracy | ±8% (220V ±8%) |
| Correction type | Relay / tap-switching |
| Частота | 50 / 60 Hz |
| Защита | Overload and over-voltage protection with delayed reconnection |
| Охлаждение | Natural air convection |
| Enclosure | Plastic housing, wall or bench mounting |
| Соответствие требованиям | CE, RoHS; produced under ISO 9001 quality system |
| Гарантия | 12 months from delivery date |
Size at 1.3x the total connected load if motors or compressors are on the same circuit.
Download & documentation
Send these to your engineering or procurement team before you shortlist a supplier.
- Download the SVR-N-5000VA datasheet (PDF)5,000VA single unit · ratings, protection, applications and ordering data
- Packing & carton quantitiesModel-by-model carton size and pcs per carton for freight costing
- Request the routine test reportPer-unit test sheet, CE / RoHS declaration and ISO 9001 reference, sent as PDF
Get a firm quotation in one working day
Tell us four things and we can quote without a second round of questions:
- Input voltage and output voltage (and the country standard)
- Required capacity in VA or the load list in watts
- Quantity for the first order and the annual volume
- Whether you need OEM branding, a custom socket or a non-standard voltage
Engineering reply, not a sales auto-responder. Samples of 1-2 pcs available for verified buyers.
Talk to the factory directly
- WhatsApp+86 156 5876 3197
- Электронная почтаsales@johsuntech.com
- Phone+86-15658763197
- Время откликаWithin 24 hours, Mon-Sat
Related pages
FAQ
What can a 5kVA stabilizer carry in practice?
Roughly 4kW of resistive load, or about 3kW of motor load once starting margin is applied. A typical fit is a house, a small restaurant, a clinic or a workshop running a compressor and single-phase machines on one feed.
My mains sits at 165V in the evening. Is this model suitable?
Yes, as long as the low point stays above 160V. Below that the unit runs out of correction range and the output falls with the input; in that case specify a wider-range model or a servo stabilizer with a lower input floor.
Can it be wall mounted?
The SVR-N frame is built for wall or bench mounting with a plastic front panel. Leave at least 10cm clear above and below the enclosure so convection can carry the heat away.
Запрос Цитировать
Сообщите нам технические характеристики, количество или сценарий применения, и мы предоставим вам индивидуальное ценовое предложение.
