الوصف
DT 3000VA step up down transformer
- المقابس اختيارية
- Carryinghandle
- Input voltage selector
- ON/OFFswitch
- حماية الصمامات/مكبس الصمامات
- Warranty:one year from delivery
الوظائف
- يمكن استخدام محول الجهد هذا في البلدان التي تعمل بجهد 110 فولت والبلدان التي تعمل بجهد 220 فولت، فهو يحول من 220-240 فولت إلى 110-120 فولت ومن 110-120 فولت إلى 220-240 فولت.
- اختيار دقيق لجهد الإدخال وفقًا للبلد الذي يتم استخدامه فيه.
- محدد جهد الإدخال: 110 فولت-120 فولت-220 فولت-220 فولت-240 فولت (يتوفر تخصيص الفولتية الأخرى)
- الإخراج: 110/220-120-120/240 فولت
- مناسبة لموزع المياه، طباخ الأرز، الطابعة طباخ الأرز، المروحة، آلة الفاكس، آلة التكييف، الكمبيوتر.
| الطراز | الطاقة الاستيعابية | حجم العبوة
(سم) |
الكمية/الحزمة |
| ST/DT-100 | 100w | 41.5×27×38 | 12 قطعة |
| ST/DT-200 | 200W | 41.5×27×38 | 12 قطعة |
| ST/DT-300 | 300W | 48×29×41 | 12 قطعة |
| ST/DT-500 | 500W | 48×29×41 | 12 قطعة |
| ST/DT-750 | 750W | 48×29×41 | 12 قطعة |
| ST/DT-1000 | 1000W | 49.5×33×21 | 2 قطعة |
| ST/DT-1500 | 1500W | 49.5×33×21 | 2 قطعة |
| ST/DT-2000 | 2000W | 49.5×33×21 | 2 قطعة |
| ST/DT-3000 | 3000W | 54.5×33×24.5 | 2 قطعة |
| ST/DT-4000 | 4000W | 54.5×33×24.5 | 2 قطعة |
| ST/DT-5000 | 5000W | 54.5×33×24.5 | 2 قطعة |
| ST/DT-7500 | 7500W | 42.5×33×28 | 1 قطعة |
| ST/DT-10000 | 1000 واط | 42.5×33×28 | 1 قطعة |
■ How to Choose This Transformer
Start from the equipment nameplate rather than from the transformer. Add the input watts of everything that will run at the same time, then apply a factor of 1.5 for heating and electronic loads, 2.5–3 for motors and pumps, and up to 5 for compressors and refrigeration. If the total falls between roughly 1,200W and 1,800W of resistive load, the DT-3000VA is the right frame.
Before ordering, confirm three practical points:
- the mains voltage where the unit will be used;
- the plug and socket standard for your market;
- whether the transformer will run from a cord or be hardwired into a terminal block.
■ Pricing, Ordering & Quality Assurance
Step Up & Step Down Transformer Price Range (100VA–10KVA)
Pricing for the DT/ST series depends on capacity, the input/output voltage combination you need, socket type, and whether a voltage selector or MCB protection is fitted. The table below gives indicative FOB levels so you can budget before requesting a firm quotation.
| الطراز | الطاقة الاستيعابية | Input / Output Voltage | تطبيق نموذجي | Indicative FOB Price (per pc)* |
|---|---|---|---|---|
| ST/DT-100 | 100VA | 110V ↔ 220V selectable | Small electronics, chargers, control circuits | US$ 10–15 |
| ST/DT-200 | 200VA | 110V ↔ 220V selectable | Bench instruments, small appliances | US$ 11–16 |
| ST/DT-300 | 300VA | 110V ↔ 220V selectable | Audio equipment, laboratory benches | US$ 12-18 |
| ST/DT-500 | 500 فولت أمبير | 110V ↔ 220V selectable | Refrigeration units, printers, POS systems | US$ 12-20 |
| ST/DT-1000 | 1000 فولت أمبير | 110V ↔ 220V selectable | Power tools, kitchen equipment, single machines | US$ 21-30 |
| ST/DT-1500 | 1500 فولت أمبير | 110V ↔ 220V selectable | Motor-driven machines, imported appliances | US$ 23-35 |
| ST/DT-2000 | 2000 فولت أمبير | 110V ↔ 220V selectable | Compressors, welders, multi-outlet benches | US$ 25-37 |
| ST/DT-3000 | 3000 فولت أمبير | 110V ↔ 220V selectable | Small production lines, test rigs | US$ 33-43 |
| ST/DT-5000 | 5000 فولت أمبير | 110V ↔ 220V selectable | HVAC, industrial machinery | US$ 52-62 |
| ST/DT-7500 | 7500VA | 110V ↔ 220V selectable | Heavy workshop loads | US$ 75-87 |
| ST/DT-10000 | 10000 فولت أمبير | 110V ↔ 220V selectable | CNC equipment, whole-panel supply | US$ 85-112 |
* Indicative FOB Ningbo/Shanghai, standard configuration, based on 50 pcs per size. Not a formal offer — final price depends on your voltage combination, socket standard, enclosure and order quantity.
- The efficiency of the DT/ST series is 80%. For equipment with motors or compressors, the starting current will multiply — always reserve adequate power margin.
- Pure resistive / electronic loads: choose a transformer with capacity ≥ 1.5× the equipment rated power.
- Inductive loads such as motors and compressors: choose a transformer with capacity ≥ 2.5–3× the equipment rated power.
- This table is for reference only. Confirm the final solution according to the rated power and duty cycle shown on your equipment nameplate.
MOQ, Lead Time & Ordering Information
| Minimum Order Quantity (MOQ) | 1 PC for standard DT models. Smaller trial orders can be discussed for first-time buyers. |
|---|---|
| Custom / OEM orders | 50 PCS for custom voltage, custom socket layout, branded front panel or non-standard capacity. |
| Sample | 1-2 pcs sample available for verified buyers. Sample lead time 3-5 working days. |
| المهلة الزمنية | 10-20 working days for standard models after order confirmation and deposit; 15-25 working days for OEM or custom configurations. |
| التعبئة | Export carton with foam. 1/2/6 pcs per carton – see the packing table above. |
| Payment terms | 100% TT IN ADVANCE FOR RETAIL/SAMPLE; 30% TT IN ADVANCE AS DEPOSIT, THE BALANCE BEFORE SHIPMENT. |
| Shipping | FOB Ningbo. CIF and door-to-door available on request. |
| الضمان | 12 MONTHS FROM DELIVERY DATE |
Certifications & Quality Assurance
DT/ST series step up and step down transformers are produced under our ISO 9001 quality management system, and every unit is 100% function-tested before packing.
CE Certified | RoHS Compliant | IEC Tested | ISO 9001 | EMC Tested | 12-Month Warranty
Certificates and routine test reports can be issued as PDF on request, for customs clearance, tender submissions or distributor onboarding.
■ FAQ
What is the difference between the DT and ST models?
Electrically they are the same double-wound transformer. DT units are catalogued for step-up duty (110V to 220V) and ST units for step-down duty (220V to 110V); both directions are available on either model through the input voltage selector.
Which rating do I need for a 1.5kW appliance?
1,500W of resistive load suits a 2KVA frame or larger. If the appliance has a motor or compressor, apply the surge factor first — a 1,500W compressor would call for a 5KVA frame or above.
Can the output socket be matched to my market?
Yes. US, UK, EU, Australian, South African and universal layouts are all produced. Specify the standard when ordering, as it is fitted during assembly rather than added afterwards.
Is a carrying handle supplied?
Yes, on every DT/ST unit up to 5KVA. From 7.5KVA upward the enclosure is intended for fixed installation.
طلب عرض أسعار
أخبرنا بالمواصفات أو الكمية أو سيناريو الاستخدام، وسنرد عليك بعرض أسعار مخصص.
