Transformador elevador y reductor DT-3000VA

Descripción

DT 3000VA step up down transformer

• Enchufes opcionales
• Carryinghandle
• Input voltage selector
• ON/OFFswitch
• Protección fusible/MCB
• Warranty:one year from delivery

Funciones

• Este convertidor de voltaje se puede utilizar en los países de 110 voltios y 220 voltios countries.it ill convertir de 220-240 voltios a 110-120 voltios y de 110-120 voltios a 220-240 voltios.
• Selección precisa de la tensión de entrada en función del país donde se utilice.
• Selector de voltaje de entrada: 110 V-120 V-220 V-240 voltios (posibilidad de personalizar otros voltajes)
• Salida:110/220-120/240 voltios
• Apto para dispensador de agua, impresora, hervidor de arroz, ventilador, fax, máquina de aire, ordenador.

■ How to Choose This Transformer

Start from the equipment nameplate rather than from the transformer. Add the input watts of everything that will run at the same time, then apply a factor of 1.5 for heating and electronic loads, 2.5–3 for motors and pumps, and up to 5 for compressors and refrigeration. If the total falls between roughly 1,200W and 1,800W of resistive load, the DT-3000VA is the right frame.

Before ordering, confirm three practical points:

• the mains voltage where the unit will be used;
• the plug and socket standard for your market;
• whether the transformer will run from a cord or be hardwired into a terminal block.

■ Pricing, Ordering & Quality Assurance

Step Up & Step Down Transformer Price Range (100VA–10KVA)

Pricing for the DT/ST series depends on capacity, the input/output voltage combination you need, socket type, and whether a voltage selector or MCB protection is fitted. The table below gives indicative FOB levels so you can budget before requesting a firm quotation.

* Indicative FOB Ningbo/Shanghai, standard configuration, based on 50 pcs per size. Not a formal offer — final price depends on your voltage combination, socket standard, enclosure and order quantity.

1. The efficiency of the DT/ST series is 80%. For equipment with motors or compressors, the starting current will multiply — always reserve adequate power margin.
2. Pure resistive / electronic loads: choose a transformer with capacity ≥ 1.5× the equipment rated power.
3. Inductive loads such as motors and compressors: choose a transformer with capacity ≥ 2.5–3× the equipment rated power.
4. This table is for reference only. Confirm the final solution according to the rated power and duty cycle shown on your equipment nameplate.

MOQ, Lead Time & Ordering Information

Certifications & Quality Assurance

DT/ST series step up and step down transformers are produced under our ISO 9001 quality management system, and every unit is 100% function-tested before packing.

CE Certified | RoHS Compliant | IEC Tested | ISO 9001 | EMC Tested | 12-Month Warranty

Certificates and routine test reports can be issued as PDF on request, for customs clearance, tender submissions or distributor onboarding.

■ FAQ

What is the difference between the DT and ST models?

Electrically they are the same double-wound transformer. DT units are catalogued for step-up duty (110V to 220V) and ST units for step-down duty (220V to 110V); both directions are available on either model through the input voltage selector.

Which rating do I need for a 1.5kW appliance?

1,500W of resistive load suits a 2KVA frame or larger. If the appliance has a motor or compressor, apply the surge factor first — a 1,500W compressor would call for a 5KVA frame or above.

Can the output socket be matched to my market?

Yes. US, UK, EU, Australian, South African and universal layouts are all produced. Specify the standard when ordering, as it is fitted during assembly rather than added afterwards.

Is a carrying handle supplied?

Yes, on every DT/ST unit up to 5KVA. From 7.5KVA upward the enclosure is intended for fixed installation.

Solicitar presupuesto